HANUMANT ELECTRONICS

1.If there is a power in the device, if there is 500mA home leakage current, then there will be an automatic adjust in 5 second.

2.As soon as home leakage circuit increases from 500mA off current leakage, then automatic adjust will be done in 5 second.

3.As soon as home leakage current increases from 500mA current, the device will be closed for 10 seconds.

4.After 5 second, if home leakage increases from 500mA to 540mA current, then the device will be off 10 seconds.

5.If the device is required from 500mA current leakage to 400mA current leakage, it will automatically adjust in 5 second.

6.If the leakage current is less than 1000mA in device running condition, as soon as it increases to minimum 40mA the device will be switched off for 10 seconds.

7.Use leakage current bypass switch for help. Beep will come in 10 seconds when bypass switch is turned on.

8.High voltage cut off adjustable switch: 240V, 260V, 280V AC.

9.Low voltage cut off adjustable switch: 100V, 120V, 140V AC.

10.Overload adjustable switch: 2kW, 3kW, 4kW with automatic reconnect.

11.Overload automatic off and auto on time: 5 seconds.

12.Short circuit: device fully off, auto will not restart.

13.Manual ON by reset switch. Home load LED display: 500W, 1kW, 1.5kW, 2kW, 2.5kW, 3kW, 3.5kW, 4kW.

14.Home leakage current LED display: 10W, 20W, 50W, 75W, 100W, 150W, 200W, 250W.